Discus and Hammer Cage 7/10 M Model “Walk Draw Gate”

The hammer cage “Walk Draw Gate” is made from special extra sturdy aluminium profiles. The posts measure a cross section of 120×100 mm. The wall thickness of the posts rises from four to six mm. In the lower part the 10 m posts are additionally reinforced with a cross bracket. All the posts are equipped with a spacer at the bottom to keep the net in the correct position. The cage is equipped with knotless UV protected PP net. The net measures a thickness of 5 mm and a mesh width of 45 mm. One set consists of four 7 m posts and four 10 m posts. The front two posts are connected with a bar. The net is fixed onto the bar. This bar replaces the common gates. The opening of the net can be adjusted from the ground easily by pulling the net in the required position. There is no further installation needed at the top of the post. This feature
provides much more comfort during the adjustment of the net position as well as during the installation.

Order No SP30305