Badminton Post in Ground Sockets

The badminton post in ground sockets is made from extra strong aluminium. The upright is realized from a square hollow profile with a cross section of 40x40x3 mm. The posts can be adjusted in height to fulfil the exact measurements required. The posts are red powder coated. The posts are designed in a manner that they do not protrude into the badminton court. The net can be tighten via a net tensioning strap. The post does not include the ground sockets.
Order No SP60080

The standard ground socket for the badminton post is made from aluminium. The socket is designed to match the square hollow profile 40×40 of the badminton post. The cover of this socket cannot be coated. It measures a total length of 270mm. The insertion length is 220mm. The ground socket is equipped with a compartment to store possible soiling without effecting the height of the post.
Order No SP60090

The special ground socket for the badminton post is made from aluminium. The socket is designed to match the square hollow profile 40×40 of the badminton post. The cover of this socket can be coated be coated with the surrounding material. It measures a total length of 270 mm. The insertion length is 220 mm. The ground socket is equipped with a compartment to store possible soiling without effecting the height of the post.
Order No SP60100

The special ground socket for the badminton post is made from aluminium. It is equipped with a special cover that can be locked. The cover can be installed 100% flush with the surrounding surface. The socket is designed to match the square hollow profile 40×40 of the badminton post. The cover of this socket can be coated be coated with the surrounding material. It measures a total length of 270 mm. The insertion length is 220 mm. The ground socket is equipped with a compartment to store possible soiling without effecting the height of the post.
Order No SP60110